Jada 99731 Ecto-1 review
An Ecto-1 for cabin and roof-equipment viewing, with a restricted rear opening in the inspected sample. Exact release, specifications and display considerations.
At a Glance
Model essentials
- Jada 99731 · 1:24
- Ghostbusters; Ecto-1 (1959 Cadillac)
- Opening parts: Hood, front doors and rear gate; rear-gate travel limited in inspected sample
- Figures: Unknown — not confirmed in exact listing
Collection highlights
- Cabin detail and printed logos praised in an inspection
- Hood and front doors open
Before you choose
- Rear hatch travel is restricted in the inspected sample
- Small paint flaws reported
Available from Diecast Models Wholesale
View model at retailer ↗Price and availability subject to change
“Opening rear gate” is not the same as an unobstructed loading bay. That distinction matters on 99731 because the published sample’s hatch encountered nearby parts before it could open widely.
Choose the viewing side around the opening you need
| Area | Inspection result | What it means for a scene |
|---|---|---|
| Hood and front doors | Open | Cabin-oriented viewing is possible |
| Rear passenger doors | Do not open | Do not plan a rear-side passenger scene around open doors |
| Rear hatch | Opens with restricted travel | Confirm clearance before making rear loading the focal point |
The inspection naming JADA 99731 also notes absent side-window glazing. An open cabin view and a fully glazed closed-car appearance are different expectations.
Give the roof equipment room to be seen
The catalog height is approximately 3.75 inches, but that number does not describe every opening pose. Keep the upper equipment visible when placing a label or another car beside it. This is a layout choice, not evidence that the roof parts are removable.
The inspection praises cabin detailing and logos while also reporting small paint flaws. Those observations concern the same sample; neither should erase the other.
Pros & Cons Analysis
See the source attributions and review limitations below.
Pros
- The exact-code inspection describes clear logo printing and a detailed driving compartment. A front three-quarter view is therefore worth considering if those features are your priorities.
- The opening hood and front doors are supported by both catalog and inspection. They allow a more accessible cabin view; they do not mean all four side doors open.
Cons
- The inspected rear hatch meets adjacent parts before opening widely. A rear-loading scene needs an actual open-hatch photograph, not just the catalog phrase “opening rear gate.”
- The sample had paint contamination, small chips and scratches. Request current close-ups where condition matters, without treating that one example as a batch-wide failure.
Keep Ecto-1’s strongest view toward the front
- Cabin and equipment-led display
- The documented cabin detail, logos and opening front access make this the stronger direction for 99731.
- Rear-loading scene
- Require an actual hatch-open view before buying. The inspected hatch met neighboring parts before opening widely.
For pristine close viewing, judge photographs of the offered paintwork. The chips and marks in one inspection are a condition warning to investigate, not a batch-wide failure rate.
Frequently Asked Questions
Do the rear passenger doors open?
The exact-code inspection reports that they do not. The documented openings are the hood, front doors and rear gate; the rear gate’s travel was limited in that sample.
Does the opening rear gate provide a wide loading view?
The inspected gate had restricted travel because it met adjacent parts. Request the normal open position before making a rear-loading scene the reason to buy.
Does this review establish a fully glazed closed cabin?
No. The inspection notes absent side-window glazing. Check that appearance in close photographs if a fully glazed presentation is essential.
Technical Specifications
| Brand | Jada |
|---|---|
| Product code | 99731 |
| Subject | Ecto-1 (1959 Cadillac) |
| Edition / version | Ghostbusters; Ecto-1 (1959 Cadillac) |
| Color / livery | White Ecto-1 livery |
| Scale | 1:24 |
| Model type | Movie car |
| Materials | Diecast metal with plastic parts |
| Length | 9 in |
| Width | 3.25 in |
| Height | 3.75 in |
| Measurement basis | Approximate catalog dimensions; pose unspecified |
| Opening panels | Hood, front doors and rear gate; rear-gate travel limited in inspected sample |
| Moving parts | Unknown |
| Lighting | Unknown |
| Power source | Unknown |
| Included figures | Unknown |
| Included equipment | Unknown |
| Display base | Unknown |
Jada 30916 Animated Series Batmobile review
Jada 32911 original DeLorean review
