Diecast Masters 85716 CAT 995 review: reserve space for the mining loader
A large CAT 995 with useful bucket movement, significant shelf requirements and an unresolved operator-removal claim.
At a Glance
Model essentials
- 995 mining loader · 1:50
- Catalog length approximately 15.9 in
- Operator removability disputed
Collection highlights
- Useful bucket movement in the inspection
- Folding rear stair and rear-axle oscillation
Before you choose
- Large display footprint
- Mixed rail materials and simplified inner wheels
- Operator-removal conflict
Available from Diecast Models Wholesale
View model at retailer ↗Price and availability subject to change
At a listed approximate length of 15.9 inches, this 1:50 CAT 995 demands a different shelf decision from a compact loader. Start by reserving its place. A large mining subject squeezed behind smaller models loses the scale contrast that makes it interesting.
The catalog rectangle is only a starting point
The merchant listing gives approximately 15.9 × 5.4 × 5.9 inches without specifying the pose. Mark that rectangle on paper to judge shelf allocation, but do not use it as a guarantee that a turned chassis or raised bucket fits inside a case.
- Choose whether the bucket will be low or raised.
- Leave access to place and retrieve the model without using its railings as handles.
- Allow the rear stair to be visible if its folded or lowered position matters to the display.
Resolve the operator before planning an empty cab
Ask for exact-code confirmation rather than treating a general High Line feature as universal. The inspection also distinguishes soft plastic rear stairs and rails from metal railings elsewhere, so the listing’s broad metal-rail wording should not be applied to every rail.
Give the movement room to matter
The inspected loader shows useful carry, lift and tip, with a working rear stair. Those features favor a spacious display where the mechanism can be seen. They do not establish a safe payload or compatibility with an arbitrary mining truck.
Pros & Cons Analysis
See the source attributions and review limitations below.
Pros
- The inspection describes strong lift and useful tip/carry movement. This gives a large display more pose options, provided the chosen enclosure accommodates them.
- A functioning rear stair adds an access-state detail distinct from the bucket pose.
Cons
- A long model needs retrieval space as well as storage space; catalog dimensions do not define the complete movement envelope.
- Soft plastic rear access parts, hollow inner wheel faces and missing pivot hoses limit some close viewing angles.
- The sources disagree about figure removal. Keep the figure in place unless exact instructions establish normal removal.
A 995 centerpiece needs space and resolved cab expectations
- Reserve the display envelope. Allow for the chosen bucket pose and normal retrieval, not just the nominal catalog rectangle.
- Resolve an empty-cab requirement. The sources disagree about operator removal; it cannot be assumed.
- Choose the rear viewing angle deliberately. The access parts use mixed materials, so broad metal-rail wording is not enough.
With those decisions settled, the documented lift, carry and tip give the large mining subject useful ways to occupy its space.
Frequently Asked Questions
Are all of the railings metal?
No. The inspection identifies soft plastic rear stairs and railings as well as metal rails elsewhere.
Can the catalog dimensions be used for a raised-bucket enclosure?
Not without a pose measurement. The catalog does not specify the measurement pose.
Is the operator definitely removable?
No. The merchant and inspection disagree; confirm the exact offered release before relying on removal.
Technical Specifications
| Brand | Diecast Masters |
|---|---|
| Product code | 85716 |
| Subject | CAT 995 |
| Edition / version | High Line Series |
| Color / livery | Caterpillar yellow |
| Scale | 1:50 |
| Model type | Mining wheel loader |
| Materials | Diecast metal with plastic parts |
| Length | 15.9 in |
| Width | 5.4 in |
| Height | 5.9 in |
| Measurement basis | Approximate catalog dimensions; pose unspecified |
| Opening panels | Unknown |
| Moving parts | Articulated steering; rear-axle oscillation; bucket lift and tilt; folding rear stair |
| Lighting | Unknown |
| Power source | Unknown |
| Included figures | Operator included; removability disputed between listing and inspection |
| Included equipment | Toothed bucket |
| Display base | Unknown |
